DENTAL MILLING CONSUMABLES
DENTAL MILLING DISCS AND ACCESSORIES
A comprehensive Range of Nexdent and Formlab 3D Printers and Printer Consumables
John Winter dental are continuing to expand our range of cutting edge dental milling materials. Dental Direkt zirconia including the incredibly popular Cubex2 ML and Cube1 ML zirconia ranges are only available from John Winter Dental. A selection of other premium materials including multi-layer PMMA, hybrid composite from Shofu and our new and revolutionary graphene, nano reinforced bio-polymer, G-Cam from Graphenano dental are also only available to order from John Winter Dental.
Zirconia by Dental Direkt
DD BIO ZX2
DD Bio ZX² is high strength, high translucency, white zirconia. Perfect for substructures of any size, cutbacks and full contour crowns and bridges. requires coloring with the DD coloring liquids.
-
1100 mpa
-
available in 14mm and 18mm.
​
​
​
​
​
​
DD BIO ZX2
COLOR
DD Bio ZX² color is high strength, high translucency, monochromatic zirconia. Perfect for substructures of any size, cutbacks and monochromatic full-contour crowns and bridges.
-
1250 mpa
-
16 vita shades and a bleach
-
14, 18mm
​
​
​
​
​
.jpg)
DD CUBE X2 ML
DD cubeX²® ML – Super High Translucent multilayer – cubic zirconia. nine layer flowing color gradation from cervical to incisal. The manufacture of aesthetic monoliths has never been this efficient. The lively chroma and an increase of translucency in the incisal third meet the highest demands of modern CAD materials.
-
800 mpa
-
16 vita shades and a bleach
-
14, 18mm
DD CUBE ONE ML
DD cube ONE® ML – High Translucent Plus Multilayer – high strength cubic zirconia offers a flowing color gradation from cervical to incisal. Ideal for large span bridges and full contour posterior crowns. Works very well using a cut back technique for anterior crowns and bridges.
-
1250 mpa
-
16 vita shades and a bleach
-
14, 18, 22mm
​
​
Colouring Liquids by Dental Direkt
DD BASIC SHADE
The Classic. Optimized for the individual painting technique (stain & glaze), minimal coating (cut back) or as a framework shade for full veneering or the combination of the techniques in one job.
"one for all"-color system. Primary color, basis for aesthetic characterisation. Higher chroma-higher grey value. Less brightness.
-
16 Vita shade
-
5 Incisal
-
30, 100ml
DD PRO SHADE Z
The “Z variants” are optimized for the individual painting technique (stain & glaze), minimal coating (cut back) or as a framework shade for full veneering or the combination of the techniques in one job. Optimised for the material specific translucency. High degree of conformity with the color ring. Less chroma – lower grey value, “more sunny” More brightness.
-
16 Vita shade
-
5 Incisal
-
30, 100ml
DD PRO SHADE C
The “C variants” are optimized for the high level of translucency of the DD cubeX²®. Monolithic full ceramic is possible with just glazing. A high aesthetic level and efficient work are combined into one.
Optimised for the material specific translucency. High degree of conformity with the color ring. Less chroma – lower grey value, “more sunny”
More brightness.
-
16 Vita shade
-
5 Incisal
-
30, 100ml
DD ART ELEMENTS
universally applicable with all DD dentine liquids and with all DD zirconium oxide types.
-
Plight pink 30ml
-
Purple 30ml
-
Blue 30ml
-
Yellow 30ml
-
Orange 30ml
-
Light brown 30ml
-
Dark brown 30ml
-
Light grey 30ml
-
Dark grey 30ml
-
Graphite 30ml
DD SHADE CONCEPT
Full Color Kits
DD Basic Shade, Pro Shade C and
Proshade Z.
​
DD Basic Shade-Set
​
DD Pro Shade C-Set
​
DD Pro Shade Z-Set
​
DD Art Elements-Set
​
DD CONTRAST
DD contrast® is a color and texture system based on glaze ceramic masses. It combines perfectly with DD zirconium oxides and is also perfectly suitable for lithium disilicate. The combination of DD contrast® color and DD contrast® texture gives monolithic restorations color intensity with a vivid depth effect. In a minimum layering of 0.1 – 0.2 mm, giving the illusion of natural dentition.
Dental Direkt Materials
DD TEMP MED
Mono chromatic high translucency PMMA in a range of shades. Suitable for temporary crowns and bridges.
-
Available in shades A1, A2, A3, A3.5, B2, C2, D2.
-
16 and 20mm
​
​
​
​
​
DD POLY XML
Multilayer PMMA
which combines 5 layers to offer a very natural aesthetic effect. High fracture resistance and continuous flexural load. Great for milled denture teeth and long term temporaries.
-
Available in shades A1, A2, A3, B3, C2, B0.
-
16 and 20mm
​
​
DD BIO SPLINT
PHi
High impact clear PMMA. low water absorbtion and high plaque resistance. Suitable for splints, jigs and guides.
-
20mm
​
​
​
​
​
​
​
​
PMMA CAST
Precolored blanks made of 100% PMMA. For the preparation of residue-free combustible models with very good milling properties (not a medical product).
-
15 and 20mm
​
​
​
​
​
​
​
DD PEEK MED
DD peek MED is the ideal combination of biocompatibility and ultimate strength. DD Peek is monomer-free, Extremely loadable and wear-rsistant. It is low density making the material very light. It adheres with PMMA​.
-
Available in shades White, Dentine, Natural, Gingivia
-
14, 18, 23mm
​
DD BIO CW
made of a high-tech polymer based on a medical grade polycarbonate. DD have developed this material innovation, as the ideal material for CAM-manufactured bite splints. Splint C has high fracture and shatter resistance.
-
15 and 20mm
​
​
​
Graphenano - Exclusive to John Winter
G-CAM
The graphene nanoreinforced biopolymer G-CAM disc, especially designed for permanent dental structures, is available in different chromatic shades that have an extremely natural aesthetic appearance. G-CAM resolves many of the mechanical, physicochemical and biological failures of other dental materials currently used in the sector.
-
Available in shades A1, A2, A3, A3.5, B2, C2, BL2, Pink
-
14, 18, 26mm
Eisenbacher Metal Discs
EISENBACHER
CHROME COBALT
DISCS
High quality 98.5mm Chrome Cobalt 'Kera' Discs are available in:
10mm, 12mm, 13.5mm, 16mm, 18mm, 20mm, 24.5mm.
EISENBACHER
TITANIUM
DISCS
Grade 5 Titanium Kera Ti5Discs are available in:
10mm, 12mm, 15mm, 16mm, 18mm
& 20mm.
Shofu Milling Materials
SHOFU
HC BLOCKS
Shofu Block HC is a hybrid composite. It can be used for almost all single-tooth indications for CAD/CAM technology and machined wet or dry in all standard milling units. HC Features exceptional long-term stability and flexural strength, plus lifelike light diffusion. It comes with three different holding pins (Universal, Cerec and Ceramill).
-
Available in shades A1, A2, A3, LT/HT
-
B3, LT
​​
SHOFU
HC DISCS
Shofu Disc HC is a hybrid composite. It can be used for almost all single-tooth indications for CAD/CAM technology and machined wet or dry in all standard milling units. HC Features exceptional long-term stability and flexural strength, plus lifelike light diffusion.
-
Available in shades A1, A2, A3, LT/HT
-
B3, LT
-
14 mm
​
​
​
Millable Wax
98mm WAX DISC
BLUE
Blue wax milling disc. perfect for the production of wax patterns for casting or pressing techniques.
Milling Machine Burs
AMANN
GIRRBACH
COMPATIBLE
Prima milling Burs to fit the Amann Girbach milling machines.
(0.6, 1, 2.5mm)
PRIMA
COATED
BURS
Prima Coated Burs are long life burs for milling zirconia on Roland/DG shape 52D and 52DCI milling systems.
(0.6, 1, 2mm)
ROLAND
UNCOATED
BURS
Standard roland burs for milling of wax, PMMA or zirconia in the Roland/DG Shape 52D and 52DCI milling systems.
(0.6, 1, 2mm)
ROLAND
GRINDING
BURS
Grinding burs for the Roland/DG Shape 42W.
(0.5, 1, 2.5mm)